32A EVSE Wallbox EV Car Charger Electric Vehicle Charging Station Wall-Mounted IP66 Type 2 Cable IEC 62196-2 Level 2 240V 7.6KW
32A EVSE Wallbox EV Car Charger Electric Vehicle Charging Station Wall-Mounted IP66 Type 2 Cable IEC 62196-2 Level 2 240V 7.6KW
RM47085554674295638
32A EVSE Wallbox EV Charger Electric Vehicle Charging Station Wall-mounted IP66 Type 2 Cable IEC 62196-2 220-240V Car Charger 7.68KW for EV Cars
32 Amps, 240V, 7.6kw, Level 2 Home EV Charging Station
Easy to use, do not need an APP to run it or home network connection
The station uses plastic and ABS material to be stronger. Button start mode and easy installation
LCD to display all the car's data on the charging station during charging. You can see the state of charge, including current, voltage and temperature. The screws are fit into the box so you don't have to worry about the screen falling. The 20ft cable leaves enough space between your car and the charging statio
Installation Method: Wall/Stand
Mode: C(with plug)
Certificate:Â CE
IP Rating: IP66
Rated Voltage:Â 220V - 240V
Rated Current:Â 32A
Maximum Power:Â 7.68KW
Phase Mode:Â Single Phase
Operating Temperature: -40°C ~ +70"C
Enclosure Material:Â ABS+PC alloy
Length of Cable:Â 6.1m
Diameter the electric wire: 2*8mm²+1*6mm²
EV charging station *1
Metal back plate *1
30mm screw *10
Plastic bolt *10
10mm screw *4
User manual *1
Hook *1 (gift)
Installation Guide:
1.Drill holes according to the position of the iron plate
2. Hammer the 30mm plastic bolts into the holes
3. Fix the iron plate with 30mm screws on the wall
4. Embed the wall box into iron plateon the wall
5. Mounting screws from both sides. You can put the hook anywhere you need. The cable can be hungon the hook
6. Connect the power wire to the distribution box. This is the final completion picture after you successfully install the wall box
Instruction For Use:
1. Make sure the wall box is connected to the power
2. Press the button on the wallbox to start/stop charging
3. Connect the EV and the wallbox with the charging plug
Type 2 suitable for EV as below:
AUDI: Q7 E-Tron, A3 E-Tron, E-Tron Quattro, E-Tron Sportback
RENAULT: Zoe, Zoe 2013, Kangoo ZE 2014-2019
BMW: i3, i8, 94AH 3Rex, 2 Series, 530e, 22Sxe, 330e, 740e, XS
TESLA: X, S, 3. with J1772/62196 adapter which does not included in this product
Kia: Niro, Niro Phev, Optima Phev
MERCEDES-BENZ: B Class E-Cell, GLE SOOe, E 350e, S500 PHEV, EQC 400, $LS EV, EQA, Vito E -Cell Van
PORSCHE: 918 Spyder, Taycan-Mission E, Cayenne, Panamera S PHEV, Panamera 4 EÂHybrid
VOLKSWAGEN: E-Up, E-Golf, Golf GTE PHEV, Golf 1.4 TSE, Passat GTE, I.D
VOLVO: S90, V90 TS, V60 PHEV, XC90 TS
HYUNDAL: Loniq Electric, Loniq Plug-In, Kona
MINI S E Countryman 2017. RANGE ROVER P400e. RIMAC Concept One.
BYD E6. MORGAN EV. JAGUAR i-Pace. MAHINDRA E20. NISSAN Leaf 201 S.
TOYOTA Prius Plug-In-Hybrid 2018.
Cautions:
This is a Mode 3 EV charging station only for Electric Vehicles with Type 2. Don't use it for EVs with other types of inlet.
- This charging unit has complicated internal structure. Any question, please do not hesitate to contact our Technical Service Team at the first time.
- Please do not take it apart without any professional technical support.
This product is only for EV charging. Please do not use it for any other purpose.
Failure to follow instructions may result in danger.
Children are prohibited from touching charging station.
Do not dissemble the charging station while it's operating.
Install the charging station away from spark-throwing, dusty or corrosive places.
Only use the charging station when it's normally operating and please strictly follow the instructions.
The charging station produces high voltage output. You must pay attention to personal safety when using it.
Any direct damage or malfunction caused by neglect, incorrect use/installation, repair by the users or natural damage are not covered by the warranty.
RM47085554674295640